Starcomm Wireless Inc. | Call Us (808) 845-7827
Starcomm Wireless Inc. | (808) 845-7827

Comparing Products



Product Summary

The NX-5000 Series offers unsurpassed interoperability for a wide variety of users as it supports three digital CAIs - NXDN, DMR and P25 (Phase 1 & 2) - plus FM analog in a single radio. Best of all, a desired CAI can be selected at will, giving you the freedom to migrate at your own pace - whether you are intent on going fully digital, undecided about which digital system to pick, or just wanting to maintain both digital and analog for a while. A NX-5000 radio can simultaneously support two digital protocols plus analog, offering the following combinations: FM/DMR/NXDN, FM/NXDN/P25, and FM/DMR/P25.

Features:

  • Multi-Digital operation in NXDN, DMR, and P25 (Phase 1 & 2)
  • Any combination of two digital protocols may be selected from NXDN, DMR, and P25
  • Mixed Digital & FM Analog Operation allows intelligent migration in mixed sites and easy migration with digital radios in other sites
  • Large, Color 1.74" (240 x 180 pixels) Transflective TFT Display for better interface even in direct sunlight and with use of polarized sunglasses
  • Easy to follow GUI for at-a-glance operational status and Multi-line Text to convey information
  • 4-way Directional-pad (D-pad) and 2-Position Lever Switch for intuitive control
  • Built-In GPS Receiver/Antenna for effective fleet management
  • Bluetooth® Module Built-in for hands-free operation
  • Renowned KENWOOD Audio Quality achieved with Active Noise Reduction (ANR) that utilizes built-in DSP with two microphones for suppression of ambient noise
  • Built-in 56-bit DES Encryption
  • Optional 256-bit AES Encryption
  • Built-in Motion Sensor for man down detection
  • microSD/microSDHC Up to 2GB/32GB Memory Card Slot for increased memory capacity for "Voice & Data""
  • IP67/68 and MIL-STD-810 C/D/E/F/G
  • 6 W (136-174 MHz ) Models
  • 5 W (380-470, 450-520 MHz) Models
  • 3 W (700/800 MHz) Models
  • Full Key Models (w/numeric keypad) and Standard Key Models (w/o numeric keypad)
  • Maximum of 1024 CH, 128 Zones (4000 Ch. Opt)
  • 1 W Speaker Audio




Product Summary

One NEXEDGE radio, multiple protocols*: the NX-5700HB (110 W) / NX-5800HB (100W) mobile transceivers support NXDN and P25 (Phase 1 & 2) digital protocols, plus FM analog for mixed operation. This high-power RF deck - equipped with Bluetooth®, GPS and a memory card slot - requires one of several optional remote control heads, all of which offer an intuitive controls for easy operation. The versatile NX-5700HB/5800HB can be combined with other RF decks and multiple remote control heads to create a radio system that is tailored to your interoperability requirements.
*Note that, unlike NEXEDGE 50W-class models, the NX-5700HB/5800HB mobile series does not support DMR.

Features:

  • Multi-digital Operation in NXDN and P25 (Phase 1 & 2) protocols
  • Multi RF Deck with Low Band / VHF / UHF / 700 & 800 MHz combination
  • Mixed Digital & FM Analog Operation allows gradual migration in mixed sites and easy migration with digital radios in other sites
  • Variety of Optional Remote Control Heads (Note:NX-5700HB/5800HB is remote operation only)
    • - Dual Remote Control Head and Multi-band (Multi RF deck) capable options
    • - Easy-to-follow controls and Information Conveying Multi-line Text are built into each control head
  • Maximum of 4,000 CH/Radio capacity, 512 CH/Zone, 128 Zones
  • Built-In GPS Receiver for effective fleet management
  • Built-in Bluetooth 4.0 for hands-free operation
  • USB Micro Terminal (up to 12 Mbps)
    • - PC Programming & Internal microSD Access (Requires USB driver for PC)
  • Renowned KENWOOD Audio Quality can be achieved with Active Noise
  • Reduction that utilizes built-in DSP for suppression of ambient noise
  • Built-in 56-bit DES encryption
  • Optional 256-bit AES encryption
  • microSD/microSDHC (Up to 2GB/32GB) Memory Card Slot for increased
  • memory capacity for "Voice & Data"
  • RF output power: VHF: 110 W to 25W / UHF: 100 W to 25 W
  • DB-25 & Molex 9-pin Accessory Connector
  • AMBE+2™ Enhanced Vocoder
  • 12 W Audio Output
  • IP54/55 and MIL-STD-810 C/D/E/F/G




Product Summary

The KENWOOD Viking 8000 series Multi-Band, Multi-Protocol mobile is specifically designed for today's public safety agencies with advanced features to meet the first responder's mission critical operational needs.



PRODUCT HIGHLIGHTS
  • Multi-Band operation (VHF, UHF, 700/800 MHz)
  • Multi-Protocol:
    • P25 Phase 1 & 2 Trunking
    • P25 Conventional
    • DMR Tier II & Tier III
    • Viking16 (SmartNet/SmartZone™ Compatible)
    • FM Analog Conventional
  • Mixed protocol zones (each channel in a zone can be from a different system)
  • 1024 channels (2048 & 4096 options)
  • P25 Authentication (Link Layer Authentication)
  • P25 GPS data (built-in GPS)*
  • MDC-1200 & GE-Star signaling
  • Analog & P25 Conventional vote scan
  • Mixed System Conventional Priority Scan (Analog, P25 Conventional, and DMR Tier II)
  • Single or Dual Remote-Mount control heads (KCH-19VM, KCH-20RV, and KCH-21RVM) or Single Dash-Mount control head (KCH-19VM)
  • Single-Deck Multi-Band operation or optional Multi-Deck operation (up to 4 RF Decks)
  • Instant Recording Replay (IRR) and Voice Recording
  • TrueVoice™ Noise Cancellation technology
  • Wi-Fi® 2.4 & 5 GHz (802.11a/b/g/n/ac)
  • Bluetooth® 5.0 & Bluetooth Low Energy
  • 15-Watt audio output via external speaker
  • High-speed programming using rear USB Type-C™ connector
  • Encryption
      ARC4™ (Motorola ADP™ compatible)
    • DES-OFB - AES-256 (FIPS 140-3) Single and Multi-Key
    • Over-the-Air-Rekeying (OTAR)
    • VK5000 or Motorola KVL4000/KVL5000 Keyloaders
    • Optional FIPS 140-3 Level 3 Encryption Module (KWD-AE40K) in compliance with federal and military requirements


Kenwood Products